[tab name="Description"]
Get more power where it counts—at impact. A stronger Rebound Frame design with dual flex zones delivers purer energy transfer from club face through the ball, enhancing distance on every shot. And it’s only available on new ZX Mk II Woods.
Most Drivers have one flex zone. Rebound Frame has two. Like a spring within a spring, Rebound Frame elevates COR across the face for increased ball speed. And that extra ball speed leads to more distance off the tee.
Here’s how it works: Like any modern Driver, the speed of ZX Mk II starts with a flexible face—and our Driver face is especially fast thanks to its advanced Ti51AF Titanium alloy construction.
The similarities end there, though, because Rebound Frame adds a second flexible zone, a ring of thin titanium in the body of the Driver. When these two zones flex simultaneously at impact, then snap back into shape, their compounded energy transfer is far more powerful than single-flex designs.
Swappable weight ports on the heel and toe allow you to adjust swing weight and Center of Gravity to favor a draw or fade shape. With the ZX7 Driver’s included 4g and 8g toe and heel weights, you can adjust your left-to-right shot shape by 5–6 yards. Opt for the full range of available weights, including a 14g option, and you could adjust your horizontal ball flight by as much as 20 yards. An adjustable hosel also provides the opportunity to perfect your preferred loft, lie, and face angle.
A complex series of ridges and latticework provides the structural integrity necessary to feature a remarkably thin titanium crown. This new, ultralight design gives us the freedom to place discretionary mass where it best suits each ZX Mk II Driver’s ideal launch and spin characteristics.
An intricate thickness pattern—hidden on the backside of our Ti51AF Driver faces—expands high COR areas from heel to toe by improving how energy reflects into the ball on off-center shots. It’s adding ball speed for even more distance off the tee.
Made for very aggressive swings. A larger footprint with forward weighting provides low spin and a high degree of forgiveness.
[tab name="Specifications"]
LOFT | HAND | LIE | VOLUME | LENGTH | SWING WEIGHT | CLUB WEIGHT |
---|---|---|---|---|---|---|
9.5° | RH/LH | 58.5° | 460cc | 45.25" | D3(R,S), D4(X) | 313g(R), 314g(S), 324g(X) |
10.5° | RH/LH | 58.5° | 460cc | 45.25" | D3(R,S) | 313g(R), 314g(S) |
[tab name="Shafts"]
The new Project X HZRDUS Black features a low-trajectory, low-spin design for better players with aggressive swing tempos. It features an ultra-stiff midsection along with a stiff tip section to provide the low launch and low spin required to keep up with your aggressive swing.
FLEX | WEIGHT | TORQUE | TIP DIAMETER | BUTT DIAMETER | LAUNCH | SPIN |
---|---|---|---|---|---|---|
X (6.5) | 71g | 3.1° | .335" | .640" | Low | Low |
S (6.0) | 62g | 3.3° | .335" | .640" | Low | Low |
R (5.5) | 62g | 3.8° | .335" | .640" | Low | Low |
The Project X HZRDUS Smoke Red RDX provides mid trajectory and mid spin for players with aggressive swing tempos. It features a stiff butt and midsection that best suit aggressive tempos, but also contains an active tip section for increased trajectory. Designed in lighter weights and optimized torques, this shaft is ideal for a wide range of mid trajectory players.
FLEX | WEIGHT | TORQUE | TIP DIAMETER | BUTT DIAMETER | LAUNCH | SPIN |
---|---|---|---|---|---|---|
X (6.5) | 60g | 3.5° | .335" | .640" | Mid | Mid |
S (6.0) | 60g | 3.5° | .335" | .640" | Mid | Mid |
R (5.5) | 60g | 4.5° | .335" | .640" | Mid | Mid |
A (5.0) | 50g | 5.9° | .335" | .640" | Mid | Mid |
[tab name="Grip"]
Golf Pride Tour Velvet grips have been the #1 choice of the world’s best for years. Our 360 version has less intrusive logos along with a state-of-the-art rubber-blend compound and a nonslip surface pattern for maximum playability.
SIZE | CORE | WEIGHT |
---|---|---|
Standard | .580" | 52g |